1994-2013 DODGE RAM 1500/2500/3500 FABRICATED CONTROL ARMS FOR STOCK TO 7" LIFT

  • Sale
  • Regular price $ 399.95



Stryker Off Road Designs' New Fabricated Control Arms! 

 

Dodge 2500 Fabricated Control Arms

These are brand new 1/4" USA steel construction. They are CAD designedCNC Plasma Cut and craftsman Welded fabricated control arms. They are designed to fit the front of a Dodge Ram 1500 2500 3500 4x4 with Stock to 7" lift height. These WILL fit the 1500 Megacab 4x4 as well.

This is for a set of 4, includes 2 uppers and 2 lowers. They definitely allow the best tire fitment as it re-centers the axle in the wheel well. These are sold in a set of 4, because you really need uppers AND lowers to re-center your axle properly. If you've installed a leveling kit, you DEFINITELY need longer control arms! This is because as you lift the truck, the angle on the arms increases, pulling it back in the wheel well.  

If you've installed a 2-3" leveling kit or a lift kit and your front tires are close to rubbing the fenders near your doors, you need longer arms to properly re-center your axle!

Stryker Fabricated Control Arm Testimonial from LM-Diesel 


Stryker Made in America

Our ARMS are guaranteed to perfectly fit your year model truck (year models have different sizes of hardware, requiring different inner diameter sleeves for optimal fitment). 

Some competitors save cost by designing only ONE size and selling you a kit full of spacers, shims or washers for you to make up for their reduced investment in your model truck.     Some of these lower cost competitors buy their "One Size Fits All" arms from China. Stryker is proud of our MADE IN THE USA sourcing. If you see a kit with lots of extra parts you might consider one exclusively designed for your truck.

Some lower cost competitors may also use cheaper rolled sleeves with a seem can split apart, due to stress from movement (see comparison images), shredding your bushings from within! 

Many competitors even use lower cost Rubber Bushings.

These arms are precisely the proper length to center your front axle within the wheel well at stock to 1 1/2", 2-3", 3 1/12" to 5" and 5 1/2" to 7" lift height - Each arm is jig-built, using precisely measured materials, and is inspected before being shipped. Buy with confidence! That's correct, Stryker designs and manufacturers a Fabricated control arm to match your truck. In OUR world of Rugged Style ONE SIZE DOES NOT FIT ALL TRUCKS!
 
Dodge Ram 2500 3500 Control Arms Lifetime Warranty

Stryker is confident in offering you a LIFETIME WARRANTY on our Fabricated control Arms because the Quality of the Engineered DesignMaterials used, Manufacturing Process, Finishing and Final Inspection WARRANT ONE!

  • CAD Designed for your HEAVY DUTY TRUCK.
  • I-BEAM construction for the ULTIMATE in Strength and Durability.
  • 1/4" USA STEEL for the confidence  you need!
  • Daystar PTMEG poly bushings to outperform the lower cost RUBBER used in most competitors offerings (including the OEM arm).
  • DOM (Drawn OVER MANDREL) Steel Sleeves to manage the lifetime wear these arms will endure.
  • Stryker's Craftsman Welders build these in HOUSE here in Marysville, TN!
  • Powered Coated in the USA under strict Stryker oversight and inspection.
  • Threaded ZERK fittings for a lifetime of optimal performance!
  • And designed for the EXACT Truck Model, Year and Lift Height to ensure all the measurements AND Components MATCH the requirement. Not a bunch of spacers and shims to make something kind of work!

Stryker Fabricated Control Arm Installation Video 

Dodge Ram Control Arms for 1500 2500 3500

 

This is an example of a Mopar OEM replacement control arm. Stryker design engineers saw room for improvement and designed both our Drawn Over Mandrel (DOM) and our NEW Fabricated High Clearance arms as a true Dodge 1500 2500 3500 Heavy Duty upgraded Control Arm.

 

Stryker's DOM Control Arms

Our heavy wall (Drawn Over Mandrel) DOM sleeves are application specific, and guaranteed to perfectly fit your year model truck (year models have different sizes of hardware, requiring different inner diameter sleeves for optimal fitment). These arms are precisely the proper length to center your front axle within the wheel well - Each arm is jig-built, using precisely measured materials, and is inspected before being shipped. Buy with confidence! These arms are precisely the proper length to center your front axle within the wheel well!

 

Stryker's HIGH CLEARANCE DOM Control Arms

Our heavy wall (Drawn Over Mandrel) HIGH CLEARANCE DOM sleeves share all of the same features and benefits as our straight arms but with the added benefit of High Clearance Control Arms for less Tire Rub and IMPROVED TURNING RADIUS. They are ALSO application specific, and guaranteed to perfectly fit your year model truck (year models have different sizes of hardware, requiring different inner diameter sleeves for optimal fitment). 

 

 If a couple more degrees of turning radius and less Tire Rub captures your attention, you should really consider a HIGH CLEARANCE control arm for your Heavy Duty 1500, 2500 or 3500. And Stryker considers our Brand New Fabricated High Clearance Arms a significant offering consistent with our goal of providing you with Rugged Style! 

Dodge Ram Fabricated High Clearance Control Arms

 

 

Fabricated High Clearance Control Arms for less Tire Rub and IMPROVED TURNING RADIUS!

These are brand new 1/4" steel construction, CAD designed, and plasma cut fabricated control arms for the front of a Dodge Ram 1500 2500 3500 4x4 with 2-3" lift height. This I-BEAM Fabrication is the epitome of Stryker's commitment to RUGGED STYLE!  These WILL fit the 1500 Megacab 4x4 as well. This is for a set of 4, includes 2 uppers and 2 lowers.  If a couple more degrees of turning radius and less Tire Rub captures your attention, you should really consider a HIGH CLEARANCE control arm for your Heavy Duty 1500, 2500 or 3500. And Stryker considers our Brand New Fabricated High Clearance Arms a significant offering consistent with our goal of providing you with Rugged Style!

 

Features:

  • LIFETIME Replacement Warranty! (excludes powder coat)
  • CAD Designed for your HEAVY DUTY TRUCK.
  • I-BEAM construction for the ULTIMATE in Strength and Durability.
  • 1/4" USA STEEL for the confidence  you need!
  • Daystar PTMEG poly bushings to outperform the lower cost RUBBER used in most competitors offerings (including the OEM arm).
  • DOM (Drawn OVER MANDREL) Steel Sleeves to manage the lifetime wear these arms will endure.
  • Stryker's Craftsman Welders build these in HOUSE here in Marysville, TN!
  • Powered Coated in the USA under strict Stryker oversight and inspection.
  • Threaded ZERK fittings for a lifetime of optimal performance!
  • And designed for the EXACT Truck Model, Year and Lift Height to ensure all the measurements AND Components MATCH the requirement. Not a bunch of spacers and shims to make something kind of work!

 

NOTE:

We also offer custom color options. If you prefer a different color powder coat, please select custom and note your color choice and we would be happy to accommodate, this  option. We use Prismatic Powders. So if you choose custom, you must go to their website (http://www.prismaticpowders.com/powder-coating-colors/), choose your color choice and provide us with the item # during checkout. Custom color choices could take up to 2 weeks to ship depending on availability of the powder coat. We can do any color you choose.

    We are always expanding our inventory of powder coat as well. Make sure to let us know which color option you would like during checkout.

    Kit Contents:

    (2) Upper Control Arms
    (2) Lower Control Arms

    NOTE:
    We also offer custom color options.  If you prefer a different color powder coat, please select custom and note your color choice and we would be happy to accommodate, this is a $100 option.  We use Prismatic Powders. So if you choose custom, you must go to their website (http://www.prismaticpowders.com/powder-coating-colors/), choose your color choice and provide us with the item # during checkout.  Custom color choices could take up to 2 weeks to ship depending on availability of the powder coat. We can do any color you choose.  

      We are always expanding our inventory of powder coat as well.  Make sure to let us know which color option you would like during checkout.