SKU:
1994 - 2013 Dodge Ram 1500/2500/3500 Control Arms
Couldn't load pickup availability
Description
Stryker Off Road Design Control Arms!
Fabricated Arms
These are brand new 1/4" USA steel construction. They are CAD designed, CNC Plasma Cut and craftsman Welded fabricated control arms. They are designed to fit the front of a Dodge Ram 1500 2500 3500 4x4 with Stock to 7" lift height. These WILL fit the 1500 Megacab 4x4 as well.
Fabricated High Clearance
If you've installed a 2-3" leveling kit or a lift kit and your front tires are close to rubbing the fenders near your doors, you need longer arms to properly re-center your axle!
Fabricated Straight Arms
DOM (Drawn Over Mandrel)
Our heavy wall (Drawn Over Mandrel) DOM sleeves are application specific, and guaranteed to perfectly fit your year model truck (year models have different sizes of hardware, requiring different inner diameter sleeves for optimal fitment).
DOM High Clearance
If a couple more degrees of turning radius and less Tire Rub captures your attention, you should really consider a HIGH CLEARANCE control arm for your Heavy Duty 1500, 2500 or 3500.
DOM Adjustable
These are brand new adjustable tubular control arms for the front of a Dodge Ram 1500/2500/3500 4x4. These WILL fit the 1500 Megacab 4x4 as well.
If you've installed any lift, you DEFINITELY need longer control arms! This is because as you lift the truck, the angle on the arms increases, pulling it back in the wheel well. Our arms are powder coated black and come with our decals for the lower arms. Again, these are brand new. They come ready to install, with pre-installed zerk fittings, Daystar PTMEG poly bushings, DOM sleeves, etc. Simply re-use your factory hardware.
DOM Fixed Length
These arms are precisely the proper length to center your front axle within the wheel well - Each arm is jig-built, using precisely measured materials, and is inspected before being shipped. Buy with confidence! These arms are precisely the proper length to center your front axle within the wheel well!
Replacement Bushings and Sleeves
This kit includes (16) bushings and (8) sleeves, enough to replace all bushings and sleeves for an entire set of control arms, uppers and lowers, specific to your vehicle. These are made to fit Stryker Off Road Design control arms. If you have control arms made by another company these may not fit. These are brand new black polyurethane bushings and DOM sleeves.
 Our ARMS are guaranteed to perfectly fit your year model truck (year models have different sizes of hardware, requiring different inner diameter sleeves for optimal fitment).
Some competitors save cost by designing only ONE size and selling you a kit full of spacers, shims or washers for you to make up for their reduced investment in your model truck. Some of these lower cost competitors buy their "One Size Fits All" arms from China. Stryker is proud of our MADE IN THE USA sourcing. If you see a kit with lots of extra parts you might consider one exclusively designed for your truck.
Some lower cost competitors may also use cheaper rolled sleeves with a seem can split apart, due to stress from movement (see comparison images), shredding your bushings from within! In OUR world of Rugged Style ONE SIZE DOES NOT FIT ALL TRUCKS!
Many competitors even use lower cost Rubber Bushings.
|
 Stryker is confident in offering you a LIFETIME WARRANTY on our Fabricated control Arms because the Quality of the Engineered Design, Materials used, Manufacturing Process, Finishing and Final Inspection WARRANT ONE!
|
Comparison
This is an example of a Mopar OEM replacement control arm. Stryker design engineers saw room for improvement and designed both our Drawn Over Mandrel (DOM) and our NEW Fabricated High Clearance arms as a true Dodge 1500 2500 3500 Heavy Duty upgraded Control Arm.
Fabricated High Clearance Control Arms for less Tire Rub and IMPROVED TURNING RADIUS!
These are brand new 1/4" USA steel construction, CAD designed, plasma cut, welded on site at at Stryker fabricated control arms for the front of a Dodge Ram 1500 2500 3500 4x4 with 2-3" lift height. This modified I-BEAM Fabrication is the epitome of Stryker's commitment to RUGGED STYLE! These WILL fit the 1500 Megacab 4x4 as well. This is for a set of 4, includes 2 uppers and 2 lowers.
|
Stryker Straight Fabricated Control Arm Installation Video
Features:
- LIFETIME Replacement Warranty! (excludes powder coat)
- CAD Designed for your HEAVY DUTY TRUCK.
- Fabricated arms are I-BEAM construction for the ULTIMATE in Strength and Durability.
- 1/4" USA STEEL for the confidence you need!
- Daystar PTMEG poly bushings to outperform the lower cost RUBBER used in most competitors' offerings (including the OEM arm).
- DOM (Drawn OVER MANDREL) Steel Sleeves to manage the lifetime wear these arms will endure.
- Stryker's Craftsman Welders build these in HOUSE here in Marysville, TN!
- Powered Coated in the USA under strict Stryker oversight and inspection.
- Threaded ZERK fittings for a lifetime of optimal performance!
- And designed for the EXACT Truck Model, Year and Lift Height to ensure all the measurements AND Components MATCH the requirement. Not a bunch of spacers and shims to make something kind of work!
NOTE:
We also offer custom color options. If you prefer a different color powder coat, please select custom and note your color choice and we would be happy to accommodate, this is a $100 option. We use Prismatic Powders. So, if you choose custom, you must go to their website (http://www.prismaticpowders.com/powder-coating-colors/), choose your color choice and provide us with the item # during checkout. Custom color choices could take up to 2 weeks to ship depending on availability of the powder coat. We can do any color you choose.
We are always expanding our inventory of powder coat as well. Make sure to let us know which color option you would like during checkout.
