LONG ARM 10" F250 4-LINK LIFT KIT 2017-2021 SUPER DUTY

  • Sale
  • Regular price $ 6,267.44



F250 F350 10" 4-Link Lift Kit with Traction Bar

We are happy to offer our newest suspension lifts! It is our “Identity 4-Link” series. This new series is the perfect balance between those that need an extremely rugged suspension lift, yet still want it to represent the Ultimate in Style! 

We address everything in this kit. Our coils with the 2.5" Identity Series top spacer and a 1.5" bottom spacer are designed to mimic the factory specs and provide a great ride. Our rear blocks have the bumpstop pads built in to utilize the factory rear bumpstops that Ford designed in for the heavy hauling these trucks were designed for. 

We went about it a little different. Instead of offering a leaf adder option we chose to raise the height of your existing leaf springs. Stryker Engineering found that manipulating the OEM Factory Springs resulted in a reduced ride experience for very little lift height improvement! 

SHOCK OPTIONS

 Stryker ORD-Level 1

F250 4 Inch Lift Kit Shocks Level 1

 

Stryker's ORD (Off Road Design) Level 1 Shock upgrade are a silver powdered 2.0 body with a nice decal (color coated to the lift options you choose). These offer 10-stage variable valving and are a nitrogen charged shock. This is a great shock for the money. With the variable valving, these can react to on road and off road conditions. They offer a great ride and carry a 3-year warranty!

 

Stryker ORD-Level 2 Bilstein

 

ORD Level 2 Bilstein Shock for F250 4 inch lifted trucks

This Stryker ORD Level 2 Shock upgrade is a special ordered Bilstein monotube shock that we stock exclusively for our kits. These deliver the performance Bilstein is known for. We took this shock to another level by taking the existing zinc plating, adding our own 3M clear protective film (as we found their zinc plating just wasn’t enough protection), then we choose a decal color that matches the lift color options you chose. 

 

Stryker ORD-Level 3 Monotube

stryker ord level 3 monotube shock for F250 4 inch lift

Stryker Level 3 Shock Recommendation

Stryker Lifetime Warranty on Level 3 Dual Steering Stabilizers

Stryker's ORD Level 3 Monotube Shocks are a T6061 brushed aluminum bodied MONOTUBE shock. They represent an OUTSTANDING combination of Ride Quality coupled with true Heavy Duty Performance when required.

These would best be described as equivalent to a Fox monotube for performance but with the added value of carrying a LIFETIME Warranty (excluding powder coat) and a clean uncluttered brushed aluminum look!


They have an internal floating piston for a very consistent performance. With the T6061 brushed aluminum body, these bodies can never rust.  With this combination of performance and value this shock option carries the STRYKER-HIGHLY-RECOMMENDED classification for this lift kit! 

 

 

Stryker ORD-Level 4 Fox 2.0 IFP

Fox 2.0 performance series shock for F250 lifted truck

This Level 4 is a Fox 2.0 Performance Series, IFP impact extruded, CNC machined 6061-T6 clear anodized aluminum one-piece body resists rust over time. Black-anodized, CNC-machined 6061-T6 billet aluminum ends. The shaft is 5/8" hard chrome plated heat treated alloy steel.

The IFP piston on this Fox 2.0 shock is a race-developed high-flow piston design. The valving, seals, redundant sealing pack system main seal, wiper seal, scraper seal are all designed for superior performance.

The oil is JM92 Advanced Suspension Fluid for improved performance at variable temperatures. The bushings are quiet nitrile rubber allows for increased suspension articulation.

 

Stryker ORD-Level 5 Fox 2.0 IFP Reservoir

Fox 2.0 Performance Reservoir Shock for F250 Lift Trucks

This Level 5 Fox 2.0 Performance Series Reservoir, IFP aluminum smooth body shock delivers FOX's industry leading and race dominating performance in an affordable, hassle-free bolt on package. Its heat reducing design includes a metal impacted clear anodized aluminum shock body that dissipates heat faster than a conventional steel body shock.

Its external reservoir allows for increase oil and nitrogen capacity while delivering a striking race look. The included black anodized reservoir mounting clamp and other components are CNC machined from 6061-T6 aluminum. The race developed high flow damping piston matched with application specific vavling provides the Performance Series 2.0 Reservoir shock a predicable ride quality capable of handling the roughest road conditions.

  • Body - 2.0" Impact extruded 6061-T6 aluminum will resist rust over time
  • Body Plating - Clear-anodized for a durable finish
  • Reservoir - 2.0" Smooth bore 6061-T6 Aluminum is hard anodized
  • Components - Black-anodized, CNC-machined 6061-T6 billet aluminum
  • Shaft - 5/8" hard chrome plated heat-treated alloy steel
  • Piston - Race-developed high-flow piston design
  • Seals - Redundant sealing pack system main seal, wiper seal, scraper seal
  • Oil - JM92 Advanced Suspension Fluid for improved performance at variable temperatures
  • Bushings - Quiet nitrile rubber allows for increased suspension articulation
Level 6 2.5" Reservoir Stryker shocks!  
F450 10 Inch Lift Kit 2.5 Reservoir Shocks
Our 2.5" reservoir shocks have 2.5 DOM steel body, billet caps in anodized black come standard, as well as rubber bushings and sleeves for optimal ride quality. Our shocks are re-buildable and re-re-valveable. Our shocks have a hardened chrome 7/8 shaft and large body floating piston remote reservoir and Buna-N seals which are good up to 250 degrees. 90 degree swivel hose comes standard. Our remote reservoir ensures consistent performance for even the most demanding off-road adventure. 

 

Level 7 2.5" Coilover Reservoir Stryker shocks! 

 

 

Our shocks have 2.5 DOM steel body, billet caps in anodized black come standard, as well as rubber bushings and sleeves for optimal ride quality, although we offer rod ends with replaceable heims, per request, at no additional charge. Our shocks are re-buildable and re-valvable.  However, we have done extensive testing and these come pre-valved specifically for your Super Duty. Our shocks have a hardened chrome 7/8 shaft and large body floating piston remote reservoir and Buna-N seals which are good up to 250 degrees. 90 degree swivel hose comes standard.  These shocks have been fully tested and perform as good as they look! Our remote reservoir ensures consistent performance for even the most demanding off-road adventure.  

DUAL STEERING STABILIZERS

There is no consensus regarding single versus dual steering stabilizers. But lifted truck projects are usually accompanied with larger tire sizes.

Larger tires bring a variety of physical demands for your F250 F350 Super Duty Truck

Vibration:
Vibration is the primary demand to focus on. The original excellent suspension on your F250 can accommodate most of that vibration. But if you improve the handling and ride quality by dampening the added side to side motion of your tires that is the first place to address. Shock absorbers dampen the up and down movement of your Super Duty and they can also dampen the side movement of your larger tires.

Dual Versus Single:
Dual stabilizers dampen the vibrations better than a SINGLE shock tied to one side in OUR opinion. Is the improvement worth the added cost? 

Of course it depends on several subjective INFORMED decisions. If your Lifted Super Duty is actually a daily driver then the performance improvement may not be required. But if you plan to build your Super Duty with the capability of HEAVY OFF ROADING even if you don't go there then DUAL is likely your best investment. The cost ADDER is actually not significant compared to the value of your F250. If your lifted truck has tires 35" or larger you are an excellent candidate to investigate a Steering Stabilizer even if Off Road is not a concern!. 

And then there is the subjective issue of STYLE! What did you want to look at when you see the front of your F250? Stryker's goal is to provide you with RUGGED STYLE™! We are committed to providing performance and style. Review our V1 and V2 offerings including 4 levels of shock upgrades.

10" Lift Kit 2.5" Sniper Reservoir Shocks Dual Steering Stabilzer

Dual Steering Stabilizer Offered

F450 10 inch Lift Kit Dual Steering Stabilizer with Fox Reservoir Shocks
F450 V1 Dual Steering Stabilizer

The Stryker V1 Off Road Design Dual Steering Stabilizer gives your truck better handling while adding to the Rugged Style of the suspension!

Our steering stabilizer provides better handling and control of oversized tires by reducing bump steer and front end vibration. It also reduces ball joint and tie rod wear and tear, and is an easy bolt on installation!

SPECIAL NOTE: If you prefer our V2 Dual Steering Stabilizer or  you would like to upgrade from our standard Level 2 Shock offering or even if you would like to upgrade from our standard Identity Series Black

just add the Lift Kit and separately add the dual steering stabilizer to your cart before checkout!

 

You will receive a 5% discount on your Steering Stabilizer calculated automatically at checkout if your cart includes the F250 10" Suspension Lift Kit.

Features:

  • CAD Designed and laser cut from 1/4" and 3/8" steel
  • Reduces bump steer and front end vibration
  • Reduces ball joint and tie rod wear and tear
  • Simply and easy bolt-on installation
  • Comes with our Level 2 Shock as standard. 
  • Made in the USA!
F450 10 inch lift V2 Dual Steering Stabilizer with 2.5 Reservoir Shocks 
F250 F350 F450 Mini Dual Steering Stabilizer

The Stryker V2 Off Road Design Mini-Truss Dual Steering Stabilizer gives your truck better handling while drastically improving the look of the suspension! Stryker Rugged Style!

You will receive a 5% discount on your Steering Stabilizer calculated automatically at checkout if your cart includes the F250 10" Suspension Lift Kit.

The Mini-Truss on the top clamp is designed to fit perfectly between your front axle's differential housing and the bump stop pad, providing all the rugged good looks of a weld-on truss with the convenience of a bolt-on stabilizer!


Our steering stabilizer provides better handling and control of oversized tires by reducing bump steer and front end vibration, as well as reducing ball joint and tie rod wear and tear.

This new clamp design does not attach to, and is not affected in any way by, the differential - Meaning you no longer have to worry about your aftermarket diff cover preventing you from running an aftermarket stabilizer!

Features:

  • CAD Designed and laser cut from 1/4" and 3/8" steel
  • Reduces bump steer and front end vibration
  • Reduces ball joint and tie rod wear and tear
  • Simply and easy bolt-on installation
  • Made in the USA!

Base Kit Contents:

  • Identity Series 4 link (optional - can comes coated any color, even two tones)
  • (qty 2) Stryker Identity Series 2.5” coil spacers with machined logo (above coil)*
  • (qty 2) Stryker 1.5” coil spacers (below coil)*
  • 6” coils (spacers extend the total lift to 10") *
  • Track Bar Drop Bracket
  • Adjustable Track Bar
  • Pitman Arm
  • Rear Blocks
  • Front Driveshaft
  • Stainless Steel Brake lines
  • Sway Bar End Links
  • Misc. Brackets
  • All Essential Hardware

* excluded with Coil Over Shock Option


Fitment:

  • 2017-2021 Ford F250 Super Duty 4WD
  • 2017-2021 Ford F350 Super Duty 4WD


Feel free to contact us at sales@strykerordesign.com or
(865) 233-0076 with any questions!