These are brand new 1/4" steel construction, CAD designed, and laser cut fabricated control arms for the front of a Dodge Ram 1500/2500/3500 4x4 with 2-3" lift height. These WILL fit the 1500 Megacab 4x4 as well. This is for a set of 4, includes 2 uppers and 2 lowers. They definitely allow the best tire fitment as it re-centers the axle in the wheel well. These are sold in a set of 4, because you really need uppers AND lowers to re-center your axle properly. If you've installed a leveling kit, you DEFINITELY need longer control arms! This is because as you lift the truck, the angle on the arms increases, pulling it back in the wheel well. Our arms are powder coated black and come with our decals for the lower arms. Again, these are brand new. They come ready to install, with pre-installed zerk fittings, Daystar PTMEG poly bushings, DOM sleeves, etc. Simply re-use your factory hardware.
What sets ours apart from other competitors? We use DOM tubing in the collars of the arms AS WELL as the sleeve. Take a look at the sleeve pics. On the left is our Stryker sleeve. On the right is a competitors. We use heavy wall DOM tubing, with NO split seam, for our sleeves. The issue with the competitors sleeves is they are thinner wall and simply rolled over. This leaves a gap/seam. These arms take a lot of back and forth pressure. Over time, the other sleeves start to pull apart at that seam, creating a sharp edge inside the bushing, causing the bushing to shred from the inside. Our sleeves are DOM, with no seam, and a much heavier wall thickness. These are guaranteed!Features:
Cad designed and laser cut
High Density Daystar PTMEG Polyurethane Bushings
DOM Collars and Sleeves
- Beefy 1/4" steel plate construction
Includes Grease-able Zerk Fittings
Black Powder Coated (unless you specify otherwise)
Stryker Off Road Design Decals
Dodge 1500/2500/3500 4x4 (any cab or engine configuration)
We also offer custom color options. If you prefer a different color powder coat, please select custom and note your color choice and we would be happy to accommodate, this is a $50 option. We use Prismatic Powders. So if you choose custom, you must go to their website (http://www.prismaticpowders.com/powder-coating-colors/), choose your color choice and provide us with the item # during checkout. Custom color choices could take up to 2 weeks to ship depending on availability of the powder coat. We can do any color you choose.
We are always expanding our inventory of powder coat as well. Make sure to let us know which color option you would like during checkout.